| Aqua Medic Electronics - Digital control |
|
electronic level and refill
controller |
The aquaniveau electronic level controller may be used in 2 different modes: - As a top up controller with one or two float switches, which is used to control the replacement of evaporated water. One switch controls the pumping from a storage vessel (not supplied), the other, if opted for, provides protection to prevent the top up pump (not supplied) from running dry. As refill pump, we recommend the peristaltic pump SP 3000. - As maximum / minimum contact to control reverse osmosis units, in conjunction with a solenoid valve. Both level switches are low voltage. |
|
electronic level and refill
controller |